Staff spinning

With 166 super bright RGB LEDs, allowing over 300 different functions, the Oddballs 300mode LED staff is a game changer. Navigating its huge functions menu couldn’t be easier.  All functions are available at the tip of your fingers, using the mini remote control. Choose from - solid white, red, green, blue, yellow, cyan and magenta, plus too many changing, pulsing and strobing effects to even begin to mention here (all with variable speed control:). Then store up to 10 of your favourites for instant access using the customisable favourites menu.

The staff's mini remote is smaller than a credit card and will easily tuck into any costume without interfering with the performer’s movement. Alternatively, the remote is effective up to 10 m, so can easily be operated by someone offstage.

The Oddballs RC Multifunction staff is part of a more environmentally friendly generation of Oddballs LED products. You can now charge your Staff almost anywhere using a standard USB charge point (laptop or power pack) via the  2-way USB - Micro usb splitter cable supplied. 

300 modes remote control

Specification:

- staff diameter: 2.5 cm

- staff length: 140CM

- Weight : 600g

- LEDs:166 RGB LEDS

- USB charge. Single USB charging cable supplied

- Playing time 1.5 hours depending on function

- Charging time 4 hours

Press the switch for 5 seconds to turn on, press for 5 seconds to turn off

Turn off via the switch on the staff to completely power off, Turning it off with the remote control will leave it in standby and will deplete the charge.

Modern and smooth, made by the best quality Atox CZ Carbon, these staffs are the best for juggling and manipulation. 

You can throw the staff two times higher than usual with less energy.

The Light Carbon Training Staff by FIrelovers features X-Grip + inner EVA soft foam and silicone knob ends.

Our modern and sleek staffs are crafted from the highest quality Atox CZ Carbon, making them the perfect choice for juggling and manipulation. The smooth finish and perfect balance provide a satisfying feel in the hand, allowing for effortless control and precision during tricks. Whether you're a professional juggler or just starting to explore the world of manipulation, these staffs are sure to impress. The Atox CZ Carbon material ensures a perfect balance between strength and weight, making it easy to handle and spin. These staffs are ideal for any performer looking for a reliable and high-quality prop that will last for years to come. 

You can throw the staff two times higher than usual with less energy.

The Light Carbon Training Staff by FIrelovers features X-Grip + inner EVA soft foam and silicone knob ends.

You can throw the staff two times higher than usual with less energy.

The Light Carbon Training Staff by FIrelovers features X-Grip + inner EVA soft foam and silicone knob ends.

This is a strong and long-lasting contact fire staff by Firelovers with a perfectly balanced weight. Red X-grip covers the maximum length of the staff. A long development and design process has allowed Firelovers to achieve excellent results with this easy-to-use staff. A perfect contact staff with 2 layers of grip and big burners.

This is a strong and long-lasting contact fire staff by Firelovers with a perfectly balanced weight.

A long development and design process has allowed Firelovers to achieve excellent results with this easy-to-use staff.

The staff is also improved by silicon ring protectors to stop dripping fuel and protect the x-grip part. 

Perfect contact staff with 2 layers of grip and big burners.

This is a strong and long-lasting contact fire staff by Firelovers with a perfectly balanced weight. Red X-grip covers the maximum length of the staff. A long development and design process has allowed Firelovers to achieve excellent results with this easy-to-use staff. The staff is also improved by silicon ring protectors to stop dripping fuel and protect the x-grip part. A perfect contact staff with 2 layers of grip and big burners.

This is very durable fire staff by Firelovers with a perfectly balanced weight. Red X-grip covers the maximum length of the staff. A long development and design process has allowed Firelovers to achieve excellent results with this easy-to-use staff. The staff is also improved by silicon ring protectors to stop dripping fuel and protect the X-grip 

The Firelovers fire staff is a top-of-the-line juggling prop that is both durable and well-balanced, making it perfect for serious fire performers. Crafted from high-quality materials and designed with precision, this staff is built to last and perform to the highest standards.

One of the standout features of the Firelovers fire staff is its perfectly balanced weight. This ensures that the staff feels comfortable and natural in your hand, making it easy to manipulate and control. The weight distribution has been carefully calibrated to ensure that the staff remains stable and level during use, which is important for maintaining a smooth and consistent performance.

Another key feature of the Firelovers fire staff is the red X-grip covering the maximum length of the staff. This provides an excellent grip that is both comfortable and secure, even during long periods of use. The X-grip is also designed to protect the staff from wear and tear, ensuring that it remains in top condition for longer.

The Firelovers fire staff is the result of a long development and design process, which has allowed Firelovers to achieve excellent results with this easy-to-use staff. Whether you're a seasoned professional or just starting out, this staff is sure to impress with its exceptional quality, performance, and durability.

Specification:

Sizes: 110 cm

Burner width: 65 mm

Tube diameter: 18 mm

Tube material: Aluminum

Grip: X-Grip + Inner Foam Grip

This is very durable fire staff by Firelovers with a perfectly balanced weight. Red X-grip covers the maximum length of the staff. A long development and design process has allowed Firelovers to achieve excellent results with this easy-to-use staff. 

This is very durable fire staff by Firelovers with a perfectly balanced weight. Red X-grip covers the maximum length of the staff. A long development and design process has allowed Firelovers to achieve excellent results with this easy-to-use staff. 

This is very durable fire staff by Firelovers with a perfectly balanced weight. Red X-grip covers the maximum length of the staff. A long development and design process has allowed Firelovers to achieve excellent results with this easy-to-use staff. The staff is also improved by silicon ring protectors to stop dripping fuel and protect the X-grip 

Professional fire staff  made of titanium tube. The staff has perfect weight for all kind of spinning. There is a pair of silicone protectors and double layer red x-grip. This staff is designed by members of Phoenix fire dancers and Firelovers team to satisfy all needs of professional staff performers all the world.

Professional fire staff  made of titanium tube. The staff has perfect weight for all kind of spinning. There is a pair of silicone protectors and double layer red x-grip. This staff is designed by members of Phoenix fire dancers and Firelovers team to satisfy all needs of professional staff performers all the world.

Professional fire staff  made of titanium tube. The staff has perfect weight for all kind of spinning. There is a pair of silicone protectors and double layer red x-grip. This staff is designed by members of Phoenix fire dancers and Firelovers team to satisfy all needs of professional staff performers all the world.

Professional fire staff  made of titanium tube. The staff has perfect weight for all kind of spinning. There is a pair of silicone protectors and double layer red x-grip. This staff is designed by members of Phoenix fire dancers and Firelovers team to satisfy all needs of professional staff performers all the world.

Professional fire staff  made of titanium tube. The staff has perfect weight for all kind of spinning. There is a pair of silicone protectors and double layer red x-grip. This staff is designed by members of Phoenix fire dancers and Firelovers team to satisfy all needs of professional staff performers all the world.

Professional fire staff  made of titanium tube. The staff has perfect weight for all kind of spinning. There is a pair of silicone protectors and double layer red x-grip. This staff is designed by members of Phoenix fire dancers and Firelovers team to satisfy all needs of professional staff performers all the world.

120cm long contact personnel.

Rubberised ends and padded handle.

Beautiful eye-catching decoration is available in many colours.

Length: 120cm

140cm long contact personnel.

Rubberised ends and padded handle.

The beautiful eye-catching decoration is available in many colours.

Length: 140cm

140cm long contact personnel.

Rubberised ends and padded handle.

Beautiful eye-catching decoration is available in many colours.

Length: 140cm

100cm long contact personnel.

Rubberised ends and padded handle.

Beautiful eye-catching decoration is available in many colours.

Length: 100cm

100cm long contact personnel.

Rubberised ends and padded handle.

Beautiful eye-catching decoration is available in many colours.

Length: 100cm

Flames 'N Games Contact Fire Staff with Silicon Grip and tassels. 100 mm wicks. The extra wide wick also has extra wrapps making it both thick as well as long.  The fire therefore is particularly big as well as super long burning time. Beautifully precision-made staff. Comes in three detachable parts using top-quality components. The extra grippy silicon combined with the staff's weight makes it perfect for contact moves. The shorter length makes it particularly good for faster rotations as well as for throwing.  The silicone tassels prevent any fuel going onto the grip keeping the staff both dry and clean. This specialist staff is perfect for very experienced players but can also be used for beginners. Ideal for performance events. Please hold the staff vertical when burning if not being spun. 

The two 100 mm para-aramid wicks create a daring and breathtaking display. 

It comes with its one top-quality bag for detachable fire heads making it easy to transport while keeping the rest of your equipment clean.

Total Lenght 120 cm; Silicon Grip length 60cm; 2x 100mm Wick; Weight 862kg.

Disclaimer: This is not a toy. It is only to be sold to adults 18 or over. fire spinning props should only ever be used by professionals. Please use at your own risk and educate yourself on the art and dangers of fire spinning, as well as taking ALL necessary safety precautions before, during, and after each use. We are not responsible for any injury caused due to the use of fire spinning props.

Flames 'N Games Contact Fire Staff with Silicon Grip and tassels. 65mm wicks. This beautifully precision-made staff. Comes in three detachable parts using top-quality components. The extra grippy silicon combined with the staff's weight makes it perfect for contact moves. The shorter length makes it particularly good for faster rotations as well as for throwing. The silicone tassels prevent any fuel going onto the grip keeping the staff both dry and clean. This specialist staff is perfect for very experienced players but can also be used for beginners. Ideal for performance events.

The two 65 mm para-aramid wicks create a daring and breathtaking display. 

It comes with its one top-quality bag for detachable fire heads making it easy to transport while keeping the rest of your equipment clean.

Total Lenght 120 cm; Silicon Grip length 60 cm; 2x 65mm Wick; Weight 820 g.

Disclaimer: This is not a toy. It is only to be sold to adults 18 or over. fire spinning props should only ever be used by professionals. Please use at your own risk and educate yourself on the art and dangers of fire spinning, as well as taking ALL necessary safety precautions before, during, and after each use. We are not responsible for any injury caused due to the use of fire spinning props.

Flames 'N Games Contact Fire Staff with Silicon Grip and tassels. 100 mm wicks. The extra wide wick also has extra wrapps making it both thick as well as long.  The fire therefore is particularly big as well as super long burning time. Beautifully precision-made staff. Comes in three detachable parts using top-quality components. The extra grippy silicon combined with the staff's weight makes it perfect for contact moves. Also suitable for faster rotations. The silicone tassels prevent any fuel going onto the grip keeping the staff both dry and clean. This specialist staff is perfect for very experienced players but can also be used for beginners. Ideal for performance events. Please hold the staff vertical when burning if not being spun. 

The two 100 mm para-aramid wicks create a daring and breathtaking display. 

It comes with its one top-quality bag for detachable fire heads making it easy to transport while keeping the rest of your equipment clean.

Total Lenght: 141 cm; Silicon Grip Length: 81.5 cm; 2x 100mm Wick; Weight: 937 g

Disclaimer: This is not a toy. It is only to be sold to adults 18 or over. fire spinning props should only ever be used by professionals. Please use at your own risk and educate yourself on the art and dangers of fire spinning, as well as taking ALL necessary safety precautions before, during, and after each use. We are not responsible for any injury caused due to the use of fire spinning props.

Flames 'N Games Contact Fire Staff with Silicon Grip and tassels. 65 mm wicks. This beautifully precision-made staff. Comes in three detachable parts using top-quality components. The extra grippy silicon combined with the staff's weight makes it perfect for contact moves. Also suitable for faster rotations. The silicone tassels prevent any fuel going onto the grip keeping the staff both dry and clean. This specialist staff is perfect for very experienced players but can also be used for beginners. Ideal for performance events.

The two 65 mm para-aramid wicks create a daring and breathtaking display. 

It comes with its one top-quality bag for detachable fire heads making it easy to transport while keeping the rest of your equipment clean.

Total Lenght: 140 cm; Silicon Grip Length: 80.5 cm; 2x 65mm Wick; Weight: 898 g

Disclaimer: This is not a toy. It is only to be sold to adults 18 or over. fire spinning props should only ever be used by professionals. Please use at your own risk and educate yourself on the art and dangers of fire spinning, as well as taking ALL necessary safety precautions before, during, and after each use. We are not responsible for any injury caused due to the use of fire spinning props.

Flames 'N Games Contact Dragon Fire Staff. Beautifully made using precision components. Four burning heads at both ends. The weight of the staff as well as the silicone grip makes it perfect for contact moves. The whole staff disassembles in minutes. The fire prongs have silicone to make them very easy to attach as well as reducing the heat. This staff looks absolutely amazing due to the 8 prongs as well as the extra absorbent wicks. This gives the staff 8 extra large fires as well as a longer burning time. The silicone tassels prevent any fuel from going onto the grip keeping the staff both dry and clean. Consisting of six 50mm removable dragon wicks and two removable 100 mm main wicks. The staff can be used without the dragon wicks if preferred or for practicing. This specialist staff is perfect for experienced players. Beginners can practice without attaching the dragon wicks. Ideal for performance events. 

Please hold the staff vertical when burning if not being spun. 

It comes with its one top-quality bag for detachable fire heads making it easy to transport while keeping the rest of your equipment clean.

Dimensions: Total Lenght 140 cm; Covered with Silicon Grip 97 cm; Centre Piece 60 cm; 2 x 40cm Ends; 2x 100mm Wick and 6x 50mm Wick; Weight 1.229 kg.

Disclaimer: This is not a toy. It is only to be sold to adults 18 or over. fire spinning props should only ever be used by professionals. Please use at your own risk and educate yourself on the art and dangers of fire spinning, as well as taking ALL necessary safety precautions before, during, and after each use. We are not responsible for any injury caused due to the use of fire spinning props.

Gora presents his 150cm travel staff variation of the amazing Gora Contact Staff. Using similar technology to the Concentrate Fire Staff locking system the Gora Travel Contact Staff behaves and performs just like the original model but with a little added weight. It is also essential to ensure that the staff is locked in place and secure before spinning! This staff is wrapped in a generous amount of EPDM rubber and sticky tennis grip making ideal for lots of body contact. As with the whole Gora staff range the core is constructed from 7075 aluminium - super strong yet reasonably light. There's also the added bonus of protective black silicone to reduce the amount of exposed metal work. The staff also comes fitted with 2 of Gora's inverted rubber 'Flowers' which are great for slowing the staff down and add a little weight towards the end of the staff giving it great momentum.

When broken down the two end pieces measure 55cm and the centre piece measures 60cm.

Gora presents his 150cm travel staff variation of the amazing Gora Contact Staff. Using similar technology to the Concentrate Fire Staff locking system the Gora Travel Contact Staff behaves and performs just like the original model but with a little added weight. It is also essential to ensure that the staff is locked in place and secure before spinning with lit fuel. This staff is wrapped in a generous amount of EPDM rubber and sticky tennis grip making ideal for lots of body contact. As with the whole Gora staff range the core is constructed from 7075 aluminium - super strong yet reasonably light. There's also the added bonus of protective black silicone to reduce the amount of exposed metal work. The staff also comes fitted with 2 of Gora's inverted rubber 'Flowers' which are great for slowing the staff down and add a little weight towards the end of the staff giving it great momentum. The Wick used is 100mm Quality Kevlar®


When broken down the two end pieces measure 55cm and the centre piece measures 60cm.

The Gora Spike Contact Staff has 3 additional fire heads mounted on semi-flexible rods. These are the same prongs found on Gora Fire Hoops. Silicone has been used to protect the spinner at certain points of the staff. Obviously this staff is only suitable for experienced fire spinners and should not be sold to those under 18 years of age.

This is a non fire contact staff specialized for an acrobatic staff style, a combination of contact staff and parkour. The staff is made of the highest quality carbon fiber composite which makes it super light but extremely durable and flexible. The staff has an extra steel weight and a rubber ending on each side for better grip on the ground and to protect the staff from abrasion. There is also a step point on the staff to help some parkour movement.

Gora has been calling this 'the ultimate contact staff' and he may be right. Gora has gone back to basics but introduced a few innovative features which really make this staff special. Using a very special aluminium alloy (known as 7075) ensures that the middle section of the staff is light yet strong as Steel. The ends have been packed with additional weight to provide awesome momentum. Furthermore the staff uses silicone protectors near the fire heads. This means that this staff has far less exposed metalwork than conventional fire staffs and is thus much safer. Gora also includes two of his signature inverted rubber 'flowers' - these slow the staff down slightly as well as giving additional weight. They can be removed if desired. Each end of the staff is finished with generous lengths of 100mm Kevlar® wick. Please note that this staff should not be held vertically whilst on fire. Fire Staff Spinning is obviously extremely dangerous - this prop should only be sold to responsible adults.

These Dragon Staff Adapter Cuffs have been designed by Gora to compatible with most Gora staffs as well other staffs with a diameter of 25mm or less. Each cuff is mounted with 4 threaded spokes which can be either attached loosely (for practice) or locked in firmly for the confident, advanced spinner. The spokes are exceptionally strong but light. Using the cuff system makes your Dragon staff easier to transport but also allows you to upgrade other staffs you may already own. The Dragon Staff Cuffs mean that the staff moves much slower and will be best suited to experienced contact staff manipulators. It goes without saying that these cuffs can make a staff exceptionally dangerous in the wrong hands - as with all fire products, these cuffs are only available to adults and we strongly advise excessive safety precautions and lots of practice before doing your first burn.

Based on experience with previous versions of Dragonstaff designs using Dragon Adapter Cuffs, this latest model incorporates 17 years of experience with the Dragonstaff and 4 years of experience with the Dragon Adapter Cuff design. 

Our new Rainbow Dragon Adapter Cuffs are the lightest Dragon Adapter Cuffs on the market (65g / adapter cuff, 272g / cuff with 4 spikes), and at the same time as strong and reliable as ever. 

Functionality

Quick link solution for instant assembling and disassembling: The connection of the spikes to the cuff is a quick link solution, which makes assembly and disassembly very quick and easy. The link is made using ball bearings fixed by steel springs, which can be fastened or loosened using the upper screws. Inserting and removing the spikes into / from the Adapter Cuff therefore takes only a single push / pull movement and does not require screwing movement or any tools. 

Rainbow Adapter Cuff fits 4 spikes each, making it suitable for 8-headed or 10-headed Dragons.

The Rainbow Adapter Cuff is made from 6082 aluminium, which is reliable, solid and lightweight. 

The spikes are made of 7075 space tech aluminium alloy, which is so lightweight it allows a 8 mm diameter for each of the spike without sacrificing stability or impact resistance. 

Package contents

This item includes:

• a pair of Rainbow Adapter Cuffs in the color of your choice (you can choose 1 color or 2 colors, if you choose 2 colors you can combine the 2 colors into one cuff)
• 8 quick link spikes with fireheads (normal or large heads)
• Alan key

Your choices

The Rainbow Adapter Cuff can connect to any staff 25mm diameter or less. If the staff is less than 25mm you need to use some sort of tape to reach the exact diameter, aluminium tape is suitable and recommended for that. You can use also some strong tape under the cuffs to protect the surface of the silicone from scratching. 

We recommend using the Rainbow Adapter Cuffs with either: 

• If you prefer a 10-headed Dragonstaff: A Gora Contact Staff (solid Fire Contact Staff or the portable Collapsible Contact Staff). In this case your Dragonstaff will have 10 (2x5) fire heads total, with one large dancing flame and a ring of fire when you roll your Dragon. If you prefer the 10-headed version, order the Gora Contact Staff of your choice + this item, which includes the adapter and the spikes with fire heads.

OR

• If you prefer a 8-headed Dragonstaff: A Gora Rainbow Dragon Staff Light (aluminum or carbon version, solid or collapsible version can be chosen under "Customize") designed for 8 (2x4) fire heads play, resulting in the lightest version of a Dragonstaff. If you prefer the 8-headed version, set parameters of the Gora Rainbow Dragon Staff Light, which includes the staff of your choice, the adapter and the spikes with fire heads.

Recommendations for use

• Choose the length of your Dragonstaff such that the distance between the two spike-crosses is at least 120 cm. For a Dragon Staff Light (for 8-heads) this means that the shortest recommended length of the staff is 120 cm. For a Contact Staff (10-heads) this means that we recommend a staff at least 150 cm long, in which case you should fix the spike-cross right next to the main fire head. 
• Do not fasten the fixing screws in the Adapter Cuff too tight, it is sufficient to tighten it enough so that the Adapter Cuff (the cross) does not turn when you roll your staff. If you fix your screws too tight, you risk damaging the silicone on your staff or causing damage if your staff falls. 
• For practice sessions you can apply the spikes by hand, but for fire spinning we recommend checking / tightening them to avoid losing them at high rotation speeds.
• 
  

Gora presents his Fire Juggling Staff designed in collaboration with AllStaff performers. This staff is designed for throws and spinning as part of double staff routines. Made from 7075 aluminium alloy this staff is super string yet very light, perfect for high throws. The staff has also been wrapped in heat-proof silicone which makes it considerably safer than other twirling staffs on the market. However fire spinning is extremely dangerous and should only be practised by adults. Price is for ONE staff - this staff will normally be used in sets of two and three. This staff uses quality 50mm Kevlar®

Yup, it's an umbrella that you can set on fire. Not particularly good for rainy days but this truly is a unique tool for making spectacular fire shows. The fire umbrella is ideal for stage shows and as it is not technically demanding to use the prop is ideal for non-juggling/manipulation based performers. Gora chose the best umbrella they could but stress that it needs careful handling and storage. If you treat it with care it will last well. Always keep it open when lit and don't close until the fire is completely extinguished. This Umbrella uses Kevlar® wick.

The Gora Practice Staff is a fantastic prop in it's own right and not just for spinners gearing up for fire twirling. This is a smooth, well balanced staff that's perfect for training or performing without fire.
The staff's core material is the same 7075 aluminium alloy found in the Gore Fire Contact Staff. This makes it exceptionally durable and very hard to bend yet still light at the same time. To give additional momentum for contact tricks there are lathed steel rods attached to either end. One of the nicest features though is the extruded EPDM rubber handle that covers most of the inner section. This is very grippy and sticky and ideal for contact staff. Gora also also included 2 of his signature inverted 'flowers' to help slow the staff. They also work as good visual markers and fan out nicely when spun correctly.

The classic recipe of a fire show is “Faster, Higher and MOOORE FIRE!”. Technically, the thai staff is a long spinner staff with an enormous amount of fire!

The thai staff is made from a 15 x 1 mm duraluminum tube. It resists the heat of the fire wonderfully and makes a very lightweight prop, however it is somewhat fragile so it is important to take care during transport, i.e. do not step on your thai staff.

The handling part in the middle is covered with the SuperGrip® which grants excellent hold.

Sillicone Disc protectors save your hands from the huge flames creeping up the staff as long as you keep spinning at least slowly. It is however important you do not perform static, vertical positions especially at the beginning of your show when the flames are still too large and hot!

The design of the fire blade is similar to that of the Fire Contact Sword or the Flying Sword.

Darth Maul is a long-term user of the Thai Staff and our most hardcore tester. We believe he could have won even this fight against two Jedi, had he used the fire version of the thai staff!

The Gora TRAVEL Spike Contact Staff has 3 additional fire heads mounted on semi-flexible rods. These are the same prongs found on Gora Fire Hoops. Silicone has been used to protect the spinner at certain points of the staff. Obviously this staff is only suitable for experienced fire spinners and should not be sold to those under 18 years of age.

The Vulcane is an elegant cane for a special substance called Lycopodium - used together carefully they can make massive fire effects to shock your audience.

Lycopodium is a fine dry powder made of a plant which has been used for fire effects for hundreds of years.
You need to sprinkle the powder into a flame. Upon contact it will catch fire and makes a massive fire circle around you.<

First you need to apply the Lycopodium into the tube (using a funnel works best). Then you can apply the paraffin to the Kevlar on the Vulcane with a syringe. From the moment you place  the Lycopodium into the tube, you have to keep the cane upright. Then carefully light the cane - make sure that there is no person, animal or any flammable material in 6 metre diameter space around you. Only if the space is safe, you can then swing the cane strongly. The centrifugal force will bring out the powder which will ignite upon contact with the head. Needless to say this is a very dangerous prop and only available to adults with adequate training.

Price is for 1 Vulcane

Do you want to truly be the star of the night? Worried that your audience has seen too many fire shows and you are looking for something new to show off? Add some spectacular flames to the finale of your show with our Mexican star!

In the 2000s this prop was not used anywhere else in the world, but Mexican fire performers used it all the time! This is why we called it Mexican Star. 

How is our star different from other options? It's simply the lightest, easiest to assemble and biggest Mexican Star in our galaxy! 

The Mexican star is typically used with staff spinning technique. The star itself determines the plane of spinning, which means the range of skills can be somewhat limited. However with the larger version (150 cm) the range of tricks is wider, as you can also use contact staff techniques or "walk into" the star. For example, you can use it similar to a jumping rope! 

The frame of the fire star if made of 15x1 mm 7075 aluminium alloy, this is what makes it light and durable at the same time. We use the same tubular kevlar and the same fixing method we have tried & tested for many years with our fire swords. At the corner (vortex) of the star we use a quick connection to attach and release two connected sides of the star with one push of a button. This saves time in assembling and disassembling the star at 8 connection points. 

This is the Juggle-Light up S-Staff / Buugeng. It measures 32" tip to tip. Made from a glossy yet grippy poly-carbonate. Each S Staff is made from a 1" tube with an LED kit fitted each end (please select your colour below). Each staff divides in to 2 sections for easy travel. The S-staff uses 2 x 'Multi-Light' units - one on each end. Each Light Unit carries 3 banks of lights/patterns (known as A, B & C). Please note that each set comes with instructions and becomes intuitive after a little getting use to.
Bank A - 7 solid colours - Press the Unit Button once to change Colour

Bank B - ...whilst on RED in Bank A - double tap the Unit Button. Bank B offers various patterns changing colours and accelerating in speed. Tap once to freeze the speed and once again to continue. Double Press the Unit Button to get to the next Pattern.

Bank C ...whilst on ORANGE in Bank A, double tap the Unit Button. Here you'll find 4 patterns with 2 colours exchanging tracer lengths. Press once to freeze, once again to resume. Double Tap to get to the next pattern. You'll then find 3 further 2 colour patterns, a Fade Function and some pretty wild alternating colours which you can freeze on by pressing the Unit Button once. Have a look at the second image to get a good idea of these functions.

Please Note that these are sold Individually. If you require a pair please purchase two pieces.

The Juggle-Light Finger LED kit is a simple performance tool for night time performances. The plastic capsule can be mounted with any colour LED diode so you can colour coordinate your gear.

This is an entry level prop and a great introductory product into the world of LED. Best used in total darkness with no other light sources

Each kit is mounted on an adjustable Velcro strap so these are suitable for fingers of all shapes and sizes. Each diode uses 3 x LR43 cell batteries (included) and a simple screw cap for on/off functionality.

Price is for one LED finger.

This is the Juggle-Light up S-Staff / Buugeng. It measures 32" tip to tip. Made from a glossy yet grippy poly-carbonate. Each S Staff is made from a 1" tube with an LED kit fitted each end (please select your colour below). Each staff divides in to 2 sections for easy travel. The S-staff uses 2 lights ,one in each end - You'll need to select 2 of the choices indicated below. The single colours are solid, static colours but you can also select FADE and STROBE functions.

1. White LED light.
2. Yellow LED light.
3. Orange LED light.
4. Red LED light.
5. Pink LED light.
6. Purple LED light.
7. Green LED light.
8. Blue LED light.
9. Turquoise LED light.
10. Fade
11. Strobe
13. Alternating

Please Note that these are sold Individually - if you require a pair please purchase two pieces.

This is the Juggle-Light LED S-Staff (Sometimes known as Buugeng). Each staff is 32" tip to tip and made from poly-carb. Constructed from a 1" tube, an LED light has been embedded at each end, allowing you to choose 2 colours. In addition this staff can be collapsed down for easy travel. Please choose 2 of these 10 ultra-bright, static, neon colours (obviously if you want your S Staff to be just one colour, then choose the same colour twice!):

1. White LED light.
2. Yellow LED light.
3. Orange LED light.
4. Red LED light.
5. Pink LED light.
6. Purple LED light.
7. Green LED light.
8. Blue LED light.
9. Turquoise LED light.
10.Fade
11. Strobe

Please Note that these Staffs are sold Individually. If you require a pair please purchase two pieces.

This is the Juggle-Light Basic LED S-Staff (sometimes known as Buugeng). The price is for one individual staff but many users will manipulate 2 x S Staff simultaneously. Each Staff is 32" tip to tip and made from poly-carb 1" tubing. This Basic S Staff also has a travel function; collapsing down by splitting in the middle. The S-staff uses 2 'Multi-Light' LED kits lights - one fitted on each end. Each Light Unit carries 3 banks of lights/patterns (known as A, B & C). Please note that each set comes with instructions and becomes intuitive after a little getting use to.
Bank A - 7 solid colours - Press the Unit Button once to change Colour

Bank B - ...whilst on RED in Bank A - double tap the Unit Button. Bank B offers various patterns changing colours and accelerating in speed. Tap once to freeze the speed and once again to continue. Double Press the Unit Button to get to the next Pattern.

Bank C ...whilst on ORANGE in Bank A, double tap the Unit Button. Here you'll find 4 patterns with 2 colours exchanging tracer lengths. Press once to freeze, once again to resume. Double Tap to get to the next pattern. You'll then find 3 further 2 colour patterns, a Fade Function and some pretty wild alternating colours which you can freeze on by pressing the Unit Button once. Have a look at the second image to get a good idea of these functions.