Juggling Clubs and Torches

The Freaks signature fire torch is the Firestorm. The backbone of the FireStorm is the new 'RaptorRod', an advanced composite material internal rod made from high strength nylon and glass-fibre and a partial aluminium core. It is extremely strong and durable with micro-flexibility to absorb shocks without bending. It is high temperature rated, resistant to fuels and will not warp.
The neck tube is strong anodised aluminium with attractive colouring, which is easier to clean. With a lathe-turned aluminium insert to strengthen the neck against damage from hard drops. The neck tube also has an internal fuel seal to prevent fuel entering. An aluminium heat shield is used on top of the body as standard. It also has an advanced high temperature synthetic fluoroelastomer washer as a powerful secondary heat shield. This high-tech material is tougher, more durable and has much higher flame and temperature resistance than normal rubber. It is much thicker than usual to offer real protection to the torch body from drops. 63mm wide pure kevlar® wick is used for big long lasting flames. It has a long handle and the balance point nearer to the center for easier catches, faster spins and more control for hand manipulation type tricks. This VINYL version has soft wrapped handles with smart GLITTER vinyl deco. Also features a high density foam knob with a unique nitrile rubber insert to offer better protection to the torch from very hard vertical drops.

The Freaks signature fire torch is the Firestorm. The backbone of the FireStorm is the new 'RaptorRod', an advanced composite material internal rod made from high strength nylon and glass-fibre and a partial aluminium core. It is extremely strong and durable with micro-flexibility to absorb shocks without bending. It is high temperature rated, resistant to fuels and will not warp.
The neck tube is strong anodised aluminium with attractive colouring, which is easier to clean. With a lathe-turned aluminium insert to strengthen the neck against damage from hard drops. The neck tube also has an internal fuel seal to prevent fuel entering. An aluminium heat shield is used on top of the body as standard. It also has an advanced high temperature synthetic fluoroelastomer washer as a powerful secondary heat shield. This high-tech material is tougher, more durable and has much higher flame and temperature resistance than normal rubber. It is much thicker than usual to offer real protection to the torch body from drops. 63mm wide pure kevlar® wick is used for big long lasting flames. It has a long handle and the balance point nearer to the center for easier catches, faster spins and more control for hand manipulation type tricks. This VINYL version has soft wrapped handles with smart Met vinyl deco. Also features a high density foam knob with a unique nitrile rubber insert to offer better protection to the torch from very hard vertical drops.

The Freaks signature fire torch is the Firestorm. The backbone of the FireStorm is the new 'RaptorRod', an advanced composite material internal rod made from high strength nylon and glass-fibre and a partial aluminium core. It is extremely strong and durable with micro-flexibility to absorb shocks without bending. It is high temperature rated, resistant to fuels and will not warp.
The neck tube is strong anodised aluminium with attractive colouring, which is easier to clean. With a lathe-turned aluminium insert to strengthen the neck against damage from hard drops. The neck tube also has an internal fuel seal to prevent fuel entering. An aluminium heat shield is used on top of the body as standard. It also has an advanced high temperature synthetic fluoroelastomer washer as a powerful secondary heat shield. This high-tech material is tougher, more durable and has much higher flame and temperature resistance than normal rubber. It is much thicker than usual to offer real protection to the torch body from drops. 63mm wide pure kevlar® wick is used for big long lasting flames. It has a long handle and the balance point nearer to the center for easier catches, faster spins and more control for hand manipulation type tricks. This SPORT version has a nice soft. foam handle. Also features a high density foam knob with a unique nitrile rubber insert to offer better protection to the torch from very hard vertical drops.

The Freaks signature fire torch is the Firestorm. The backbone of the FireStorm is the new 'RaptorRod', an advanced composite material internal rod made from high strength nylon and glass-fibre and a partial aluminium core. It is extremely strong and durable with micro-flexibility to absorb shocks without bending. It is high temperature rated, resistant to fuels and will not warp.
The neck tube is strong anodised aluminium with attractive colouring, which is easier to clean. With a lathe-turned aluminium insert to strengthen the neck against damage from hard drops. The neck tube also has an internal fuel seal to prevent fuel entering. An aluminium heat shield is used on top of the body as standard. It also has an advanced high temperature synthetic 'fluoroelastomer' washer as a powerful secondary heat shield. This high-tech material is tougher, more durable and has much higher flame and temperature resistance than normal rubber. It is much thicker than usual to offer real protection to the torch body from drops. 63mm wide pure kevlar® wick is used for big long lasting flames. It has a long handle and the balance point nearer to the centre for easier catches, faster spins and more control for hand manipulation type tricks. This VINYL version has soft wrapped handles with simple vinyl deco. Also features a high density foam knob with a unique 'nitrile' rubber insert to offer better protection to the torch from very hard vertical drops.

Our body torches are a unique prop for fire dancers and acrobats. They create a wonderful set with our hand candles, which are similar in design.

The difference is that the body torches can be attached to different parts of your body. They have a different attachment method, have a longer wire and a larger head. It is also possible to use the body torches as a hand candle.

The thick leather circle protects the body from the heat of the flames. The Kevlar head is attached to a flexible spring wire which ensures that it doesn’t break or bend when hit by a force. This design supports durability and channels less heat towards your body.

The body torches are fastened to your body with a velcro, so you can take them off with a single movement if necessary. The body torches can be attached to your upper and lower arms and ankles.

Prices are for a pair.

Usage recommendations:

• Read and follow fire safety requirements for clothing, this is especially important in case of body torches! For example, if you use the body torches on your legs, it is of uttermost importance that you wear either nothing on your legs, or relatively thick, fire safe materials which align with your legs and are not loosely floating. Also, never ever wear polyester or any fibers containing plastics.
• Always check the wind direction. Don’t use the body torches when the wind is strong, and take into account the wind direction in case of any wind at all – it can blow the flames towards your body.
• Thoroughly test your choreography, especially acrobatics to understand which moves channel the flames and heat towards your body.

• No fuel should get on the leather parts.
• Do not store your body torches in a closed bag, as the fuel might evaporate and eventually soak the leather parts, creating a fire hazard!
• After use, wait until the torches cool down, then store in a bag with some ventilation.
• Be careful when you hold the torches upside down!

Picture courtesy of Jon Sturdy Photography (www.eastcoastwest.co.uk) with JC Aerial School.

Juggling torches with huge flames. While with the normal torches you can see only dots running around, these swords show how the blades are turning, and make a much nicer effect.

The silicone disc protects your hands. The handles are ergonomic and the grip is made of a soft, spongy plastic. The weight balance is very close to the normal clubs.

Did you ever had the feeling that your juggling torches are too small for the stage? With this Fire Juggling Swords you will never get that feeling.

The weight of a piece is 265g.

• Use lower heat level liquid like paraffin, lamp oil or barbecue oil.
• Do not use white spirit or benzene!
• Do not keep the swords downwards continuously.
• Do not light them many times without stops. Too much heat breaks the fiberglass.
• Use background light to see the handle side precisely.

Add a fresh new look to your juggling clubs with these tough EVA Tops from Henry's. Designed for use with Pirouette clubs, these tops are also compatible with the complete Henry's range. Made from durable EVA material, they are built to withstand heavy use and provide a secure grip. Available in a selection of colors, you can choose the one that best matches your style. Whether you're looking to replace old or worn-out tops or just want to give your clubs a new look, these EVA Tops are the perfect choice.

Add a fresh new look to your juggling clubs with these tough EVA Ends from Henry's. Designed for use with Delphin and Albatross clubs, these ends are also compatible with the complete Henry's range. Made from durable EVA material, they are built to withstand heavy use and provide a secure grip. Available in a selection of colors, you can choose the one that best matches your style. Whether you're looking to replace old or worn-out ends or just want to give your clubs a new look, these EVA Ends are the perfect choice.

The 'Circus' decorated Pirouette club is all about the razzle-dazzle. When it comes to show time, there are few clubs that look quite as glamorous as the Henrys Pirouette with this choice of decoration. The Pirouette is an elegant, long handle club suited to jugglers of all abilities - it excels however in the hands of proficient numbers jugglers. An air cushioned wrapped handle couple with a strong ash dowel makes this a comfortable club with construction you can rely upon, year after year. Much research has gone in to sourcing decoration which stays put and doesn't affect the weight or balance of the club. Please select your colour below.

The ideal Passing-Club for the show; large body (Ø 10cm), weight ca. 230g; length 52cm. Despite the large body, this club possesses excellent flying characteristics. Because of its slower turns its also good for beginners.

The Henry's Pirouette club is a reliable circus prop used all over the world. Using a solid, ash dowel and with quality plastic components the pirouette is a long handle club ideally suited to numbers juggling. That said, this club will be appreciated by jugglers of all abilities. This version has been decorated in a 'European' style, with metallic tape at the top and bottom of the body. Henry's have taken great pains to ensure that this decoration does not affect the weight or balance of this club. Available in a selection of colours - please make your selection below.

The world famous Henry's Pirouette with a Glitter Make-Over. This club is all about the performance aspect. Beautiful and flashy, with the build quality to match. Henry's haven't compromised on the club's performance with decoration - the flight characteristics and versatility of this prop are still perfectly intact. Recommended for performers who need a little 'pizazz' in their props.

Without a doubt the Rolls-Royce of fire clubs. The Nite-Flite is used extensively by fire performers all over the planet. It's classic design with decorated body and air-cushioned handle make it the perfect prop for performances, behaving a predictable, floaty spin. The Nite Flite is both light and robust - it uses an ashwood core which has been reinforced with an aluminium tube which extends in to the handle making it nearly indestructible.
The wooden cone (which is decorated with metallic foil) is protected with an aluminium disc. The additional rubber disc protects both the cone body and wick from being damaged by ground contact. As with the complete Henry's range, attention to detail is apparent throughout - weight discrepancy between clubs is practically non-existent. Wick is easily replaceable. Available in a number of colours - please make your selection below.

The ideal Passing-Club for performers. A large, super visible body (Ø 10cm) but a standardised weight (230g) and length (52cm) make this an ideal stage prop. Despite the large body, this club possesses excellent flying characteristics and is used worldwide. Because of the slower spin it is also great for beginners. An all-round winner with flashy decoration and aire-cushioned wrapped handle. As with all Henry's products the craftsmanship is superb - made to eact requirements by a dedicated team in the heart of Germany. Price is for one club.

The ideal Passing-Club for the show; large body (Ø 10cm), weight ca. 230g; length 52cm. Despite the large body, this club possesses excellent flying characteristics. Because of the Albatross' slower turns it is also good for beginners - a reliable, predictable, graceful club. Supplied with coloured body and wrapped silver handles.

Special club for children

This club is specially made for children. It is only 46cm long and weights ca. 190g. It's very short wrapped handle is perfect for children's hands and arms. So it can help to make it easier for them to learn juggling with clubs. Training club, without decoration.

Length: 46cm

Weight: ca. 190g

White handle, knob and top black.

Colors: red, yellow, green.

Get a secure grip on your juggling clubs with this tough EVA knob from Henry's. Designed specifically for use with Nite Flite clubs, this knob is also compatible with Pirouette, Albatross, and Mirage clubs. Its squared-off shape provides a comfortable and stable hold, while its durable EVA material is built to withstand heavy use. This knob is sold individually, so you can replace just one or stock up to have extras on hand. Whether you're practicing your tricks or performing for an audience, this knob will help you keep a firm hold on your clubs.

Priced for one.